MOGAMI 2948
MOGAMI 2948
2948 MIDI
PRZEWODY CYFROWE
Przewody MOGAMI MIDI SYNCHRO zostały specjalnie zaprojektowane do współpracy z protokołem MIDI (Musical Instrument Digital Interface)
Przeznaczone do połączeń pomiędzy instrumentami i urządzeniami obsługującymi protokół MIDI. Zapewniają szybką i dokładną transmisję danych poprzez skręcona parę przewodów dla lepszej skuteczności znoszenia zakłóceń elektromagnetycznych. Dodatkowe dwa przewody pozawalają na przesłanie sygnału synchronizującego.
Sugerowana cena sprzedaży brutto:
1 m - 12,00 PLN
Zastosowanie:
RoHS
Studio rejestracja
Instrumental
Configuration | ||
Cable Part No. | W2948 | W3033 |
Conductor | 30/0.08A (30×#40) 0.15mm² (#26AWG) | |
Insulation | 1.2Ø (0.047"Ø) PVC (BLACK/WHITE/RED/GREEN) | |
Shield | 98/0.12A (98×#37) Served Shield | |
Jacket | 5.0Ø (0.197"Ø) Flexible PVC (BLACK) | |
Weight | 8.6kg/200m | 15kg/200m |
PLUG | |
Pins | 0.76µ gold or silver plated brass |
Shield | Nickel Plated Brass |
Insulation | Polyacetal Resin |
Molding | Flexible PVC (Two Stage Molding) (BLACK) |
DC Resistance (20°C) | Inner Cond.: 0.12Ω/m(0.037Ω/Ft) Shield: 0.02Ω/m(0.006Ω/Ft) |
Capacitance (1kHz, 20°C) | Between Twisted Pair: 99 pF/m (30 pF/Ft) Between Shield and one of Twisted Pair: 182 pF/m (56 pF/Ft) Between Shield and Synchro Conductor: 180 pF/m (55 pF/Ft) Between One of Twisted Pair and Synchro Conductor: 91 pF/m (28 pF/Ft) |
Pitch of Twisted Pair | Approx. 30mm (1.18") |
Electromagnetic Noise* | 0.02‾0.06mV |
Voltage Breakdown | Must withstand at DC 500V/15sec. |
Insulation Resistance (DC 125V, 20°C) |
10000 MΩ × m Min. |
Tensile Strength (At Cable-Connector Joint) |
480 N Min. |
Flex Life* : At the connector strain relief : Cable itself (200gr, Bend radius of the cable stopper : 12.7mm) |
45,000 Cycles 6,700 Cycles |
Emigration | Non-emigrant to ABS resin |
* Using standard testing method of Mogami Wire & Cable Corp.
WIRING DIAGRAM:
The MIDI signal is transmitted via a twisted pair (black and white) and wired to pins 4 & 5.
NOTE: | Transmission lag in MIDI systems is mainly caused by the speed of the photocoupler and the rise time of the driver rather than the transmission characteristics of the cable. |